Quantcast
Channel: ToManual.com » wire cutters
Browsing latest articles
Browse All 9 View Live

HONDA VTX 1300 BA-2461-00 – Needle/Jet Kit Installation Instructions

Download CAUTION! We Strongly recommend that a qualified Honda Technician install this kit since the carburetors must be removed from the motorcycle. INCLUDED IN THE KIT: (4) Baron Main Jets (190, 195,...

View Article



Honda CB160/CL160 FS-09 Electronic Ignition Manual Installation Instructions

Download The Model FS-09 electronic ignition is designed specifically for 1960s through1970s Honda CB160, Honda CL160, Honda CB175, Honda CL175, and Honda SL175, all with derivatives of Honda’s early...

View Article

FORD FOCUS ZX3 AND ZX5 Vehicle Specific Subwoofer Enclosure Owners manual

Download The enclosure mounts in the rear drivers’ side, behind back seat firing to the side in the Ford Focus hatchbacks. TOOLS REQUIRED FOR INSTALLATION: Powered Screwdriver #2 Phillips Head Bit 6″...

View Article

FORD EXPEDITION AND LINCOLN NAVIGATOR

Download READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING MOUNTING LOCATION: The enclosure mounts behind rear panel on passenger’s side and replaces factory cargo net. TOOLS REQUIRED FOR INSTALLATION:...

View Article

Audi A8 D3 Sony HCB-30 Bluetooth Kit Installation Checklist

Download kit Torx T-35 screwdriver Soldering iron Solder Heat gun or other heat source to heat shrink tubing Drill with 3/8″ bit Small wire cutters Wire strippers that go down to 20 gage wire...

View Article


Ford F650-750 CAT Re-Gen System Installation Instructions

Download 1. Planning Information a. 2008-09 YM Ford F650-750 i. Caterpillar C7 2. Purpose a. This instruction document shall provide guidance for installation of the TFB Global CAT Diesel Re-Gen...

View Article

AUDI NEW BEETLE ECU INSTALLATION

Download 1 Remove the Dash Panel. Place both hands on either side of the center dash panel, firmly grip and slide forward, then lift. Step 2 Remove Upper Dash Panel Screws. Remove the four T-20 torx...

View Article

HONDA VTX1300 BA-2461-00–Needle/Jet Kit Installation Guides

Download INCLUDED IN THE KIT: (4) Baron Main Jets (190, 195, 200, 210) (1) Baron Adjustable Needle (1) Baron Pilot Jet ( BP1 ) (2) E-Clips (1) Baron Slide Spring (1) Baron D-Tool TOOLS REQUIRED:...

View Article


HONDA RIDGELINE JACKRABBIT SERIES INSTALLATION INSTRUCTIONS

Download TOOLS REQUIRED FOR ASSEMBLY: 3/8″ wrench or socket #2 Phillips screwdriver Wire Cutters Razor box Knife #40 Torx wrench #50 Torx wrench Drill w/ 3/4″ taper drill or step drill bit BEFORE YOU...

View Article

Browsing latest articles
Browse All 9 View Live




Latest Images